Python’s Itertool is a module that provides various functions that work on iterators to produce complex iterators. This module works as a fast, memory-efficient tool that is used either by themselves or in combination to form iterator algebra.
For example, let’s suppose there are two lists and you want to multiply their elements. There can be several ways of achieving this. One can be using the naive approach i.e by iterating through the elements of both the list simultaneously and multiply them. And another approach can be using the map function i.e by passing the mul operator as a first parameter to the map function and Lists as the second and third parameter to this function. Let’s see the time taken by each approach.
# Python program to demonstrate
# iterator module
import operator
import time
# Defining lists
L1 = [1, 2, 3]
L2 = [2, 3, 4]
# Starting time before map
# function
t1 = time.time()
# Calculating result
a, b, c = map(operator.mul, L1, L2)
# Ending time after map
# function
t2 = time.time()
# Time taken by map function
print("Result:", a, b, c)
print("Time taken by map function: %.6f" %(t2 - t1))
# Starting time before naive
# method
t1 = time.time()
# Calculating result usinf for loop
print("Result:", end = " ")
for i in range(3):
print(L1[i] * L2[i], end = " ")
# Ending time after naive
# method
t2 = time.time()
print("nTime taken by for loop: %.6f" %(t2 - t1))
Output:
Result: 2 6 12
Time taken by map function: 0.000005
Result: 2 6 12
Time taken by for loop: 0.000014
In the above example, it can be seen that the time taken by map function is approximately half than the time taken by for loop. This shows that itertools are fast, memory-efficient tool.
Different types of iterators provided by this module are:
- Infinite iterators
- Combinatoric iterators
- Terminating iterators
- Infinite iterators
Iterator in Python is any Python type that can be used with a ‘for in loop’. Python lists, tuples, dictionaries, and sets are all examples of inbuilt iterators. But it is not necessary that an iterator object has to exhaust, sometimes it can be infinite. Such type of iterators are known as Infinite iterators.
Python provides three types of infinite itertors:
count(start, step): This iterator starts printing from the “start” number and prints infinitely. If steps are mentioned, the numbers are skipped else step is 1 by default. See the below example for its use with for in loop.
Example:
# Python program to demonstrate
# infinite iterators
import itertools
# for in loop
for i in itertools.count(5, 5):
if i == 35:
break
else:
print(i, end =" ")
Output:
5 10 15 20 25 30
cycle(iterable): This iterator prints all values in order from the passed container. It restarts printing from the beginning again when all elements are printed in a cyclic manner.
Example 1:
# Python program to demonstrate
# infinite iterators
import itertools
count = 0
# for in loop
for i in itertools.cycle('AB'):
if count > 7:
break
else:
print(i, end = " ")
count += 1
Output:
A B A B A B A B
Example 2: Using next function.
# Python program to demonstrate
# infinite iterators
import itertools
l = ['prutor', 'for', 'prutor']
# defining iterator
iterators = itertools.cycle(l)
# for in loop
for i in range(6):
# Using next function
print(next(iterators), end = " ")
Combinatoric iterators
Output:
prutor.ai prutor.ai
repeat(val, num): This iterator repeatedly prints the passed value infinite number of times. If the optional keyword num is mentioned, then it repeatedly prints num number of times.
Example:
# Python code to demonstrate the working of
# repeat()
# importing "itertools" for iterator operations
import itertools
# using repeat() to repeatedly print number
print ("Printing the numbers repeatedly : ")
print (list(itertools.repeat(25, 4)))
Output:
Printing the numbers repeatedly :
[25, 25, 25, 25]
Combinatoric iterators
The recursive generators that are used to simplify combinatorial constructs such as permutations, combinations, and Cartesian products are called combinatoric iterators.
In Python there are 4 combinatoric iterators:
Product(): This tool computes the cartesian product of input iterables. To compute the product of an iterable with itself, we use the optional repeat keyword argument to specify the number of repetitions. The output of this function are tuples in sorted order.
Example:
# import the product function from itertools module
from itertools import product
print("The cartesian product using repeat:")
print(list(product([1, 2], repeat = 2)))
print()
print("The cartesian product of the containers:")
print(list(product(['prutor', 'for', 'prutor'], '2')))
print()
print("The cartesian product of the containers:")
print(list(product('AB', [3, 4])))
Output:
The cartesian product using repeat:
[(1, 1), (1, 2), (2, 1), (2, 2)]
The cartesian product of the containers:
[('prutor', '2'), ('for', '2'), ('prutor', '2')]
The cartesian product of the containers:
[('A', 3), ('A', 4), ('B', 3), ('B', 4)]
Permutations(): Permutations() as the name speaks for itself is used to generate all possible permutations of an iterable. All elements are treated as unique based on their position and not their values. This function takes an iterable and group_size, if the value of group_size is not specified or is equal to None then the value of group_size becomes length of the iterable.
Example:
# import the product function from itertools module
from itertools import permutations
print ("All the permutations of the given list is:")
print (list(permutations([1, 'prutor'], 2)))
print()
Terminating iterators
print ("All the permutations of the given string is:")
print (list(permutations('AB')))
print()
print ("All the permutations of the given container is:")
print(list(permutations(range(3), 2)))
Output:
All the permutations of the given list is:
[(1, 'prutor'), ('prutor', 1)]
All the permutations of the given string is:
[('A', 'B'), ('B', 'A')]
All the permutations of the given container is:
[(0, 1), (0, 2), (1, 0), (1, 2), (2, 0), (2, 1)]
Combinations(): This iterator prints all the possible combinations(without replacement) of the container passed in arguments in the specified group size in sorted order.
Example:
# import combinations from itertools module
from itertools import combinations
print ("All the combination of list in sorted order(without replacement) is:")
print(list(combinations(['A', 2], 2)))
print()
print ("All the combination of string in sorted order(without replacement) is:")
print(list(combinations('AB', 2)))
print()
print ("All the combination of list in sorted order(without replacement) is:")
print(list(combinations(range(2), 1)))
Output:
All the combination of list in sorted order(without replacement) is:
[('A', 2)]
All the combination of string in sorted order(without replacement) is:
[('A', 'B')]
All the combination of list in sorted order(without replacement) is:
[(0, ), (1, )]
Combinations_with_replacement(): This function returns a subsequence of length n from the elements of the iterable where n is the argument that the function takes determining the length of the subsequences generated by the function. Individual elements may repeat itself in combinations_with_replacement function.
Example:
# import combinations from itertools module
from itertools import combinations_with_replacement
print ("All the combination of string in sorted order(with replacement) is:")
print(list(combinations_with_replacement("AB", 2)))
print()
print ("All the combination of list in sorted order(with replacement) is:")
print(list(combinations_with_replacement([1, 2], 2)))
print()
print ("All the combination of container in sorted order(with replacement) is:")
print(list(combinations_with_replacement(range(2), 1)))
Output:
All the combination of string in sorted order(with replacement) is:
[('A', 'A'), ('A', 'B'), ('B', 'B')]
All the combination of list in sorted order(with replacement) is:
[(1, 1), (1, 2), (2, 2)]
All the combination of container in sorted order(with replacement) is:
[(0, ), (1, )]Terminating iterators
Terminating iterators
Terminating iterators are used to work on the short input sequences and produce the output based on the functionality of the method used.
Different types of terminating iterators are:
accumulate(iter, func): This iterator takes two arguments, iterable target and the function which would be followed at each iteration of value in target. If no function is passed, addition takes place by default. If the input iterable is empty, the output iterable will also be empty.
Example:
# Python code to demonstrate the working of
# accumulate()
import itertools
import operator
# initializing list 1
li1 = [1, 4, 5, 7]
# using accumulate()
# prints the successive summation of elements
print ("The sum after each iteration is : ", end ="")
print (list(itertools.accumulate(li1)))
# using accumulate()
# prints the successive multiplication of elements
print ("The product after each iteration is : ", end ="")
print (list(itertools.accumulate(li1, operator.mul)))
# using accumulate()
# prints the successive summation of elements
print ("The sum after each iteration is : ", end ="")
print (list(itertools.accumulate(li1)))
# using accumulate()
# prints the successive multiplication of elements
print ("The product after each iteration is : ", end ="")
print (list(itertools.accumulate(li1, operator.mul)))
Output:
The sum after each iteration is : [1, 5, 10, 17]
The product after each iteration is : [1, 4, 20, 140]
The sum after each iteration is : [1, 5, 10, 17]
The product after each iteration is : [1, 4, 20, 140]
chain(iter1, iter2..): This function is used to print all the values in iterable targets one after another mentioned in its arguments.
Example:
# Python code to demonstrate the working of
# and chain()
import itertools
# initializing list 1
li1 = [1, 4, 5, 7]
# initializing list 2
li2 = [1, 6, 5, 9]
# initializing list 3
li3 = [8, 10, 5, 4]
# using chain() to print all elements of lists
print ("All values in mentioned chain are : ", end ="")
print (list(itertools.chain(li1, li2, li3)))
Output:
All values in mentioned chain are : [1, 4, 5, 7, 1, 6, 5, 9, 8, 10, 5, 4]
chain.from_iterable(): This function is implemented similarly as chain() but the argument here is a list of lists or any other iterable container.
Example:
# Python code to demonstrate the working of
# chain.from_iterable()
import itertools
# initializing list 1
li1 = [1, 4, 5, 7]
# initializing list 2
li2 = [1, 6, 5, 9]
# initializing list 3
li3 = [8, 10, 5, 4]
# intializing list of list
li4 = [li1, li2, li3]
# using chain.from_iterable() to print all elements of lists
print ("All values in mentioned chain are : ", end ="")
print (list(itertools.chain.from_iterable(li4)))
Output:
All values in mentioned chain are : [1, 4, 5, 7, 1, 6, 5, 9, 8, 10, 5, 4]
compress(iter, selector): This iterator selectively picks the values to print from the passed container according to the boolean list value passed as other arguments. The arguments corresponding to boolean true are printed else all are skipped.
Example:
# Python code to demonstrate the working of
# and compress()
import itertools
# using compress() selectively print data values
print ("The compressed values in string are : ", end ="")
print (list(itertools.compress('GEEKSFORGEEKS', [1, 0, 0, 0, 0, 1, 0, 0, 1, 0, 0, 0, 0])))
Output:
The compressed values in string are : ['P', 'A', 'I']
dropwhile(func, seq): This iterator starts printing the characters only after the func. in argument returns false for the first time.
Example:
# Python code to demonstrate the working of
# dropwhile()
import itertools
# initializing list
li = [2, 4, 5, 7, 8]
# using dropwhile() to start displaying after condition is false
print ("The values after condition returns false : ", end ="")
print (list(itertools.dropwhile(lambda x : x % 2 == 0, li)))
Output:
The values after condition returns false : [5, 7, 8]
filterfalse(func, seq): As the name suggests, this iterator prints only values that return false for the passed function.
Example:
# Python code to demonstrate the working of
# filterfalse()
import itertools
# initializing list
li = [2, 4, 5, 7, 8]
# using filterfalse() to print false values
print ("The values that return false to function are : ", end ="")
print (list(itertools.filterfalse(lambda x : x % 2 == 0, li)))
Output:
The values that return false to function are : [5, 7]
islice(iterable, start, stop, step): This iterator selectively prints the values mentioned in its iterable container passed as argument. This iterator takes 4 arguments, iterable container, starting pos., ending position and step.
Example:
# Python code to demonstrate the working of
# islice()
import itertools
# initializing list
li = [2, 4, 5, 7, 8, 10, 20]
# using islice() to slice the list acc. to need
# starts printing from 2nd index till 6th skipping 2
print ("The sliced list values are : ", end ="")
print (list(itertools.islice(li, 1, 6, 2)))
Output:
The sliced list values are : [4, 7, 10]
starmap(func., tuple list): This iterator takes a function and tuple list as argument and returns the value according to the function from each tuple of list.
Example:
# Python code to demonstrate the working of
# starmap()
import itertools
# initializing tuple list
li = [ (1, 10, 5), (8, 4, 1), (5, 4, 9), (11, 10, 1) ]
# using starmap() for selection value acc. to function
# selects min of all tuple values
print ("The values acc. to function are : ", end ="")
print (list(itertools.starmap(min, li)))
Output:
The values acc. to function are : [1, 1, 4, 1]
takewhile(func, iterable): This iterator is opposite of dropwhile(), it prints the values till the function returns false for 1st time.
Example:
# Python code to demonstrate the working of
# takewhile()
import itertools
# initializing list
li = [2, 4, 6, 7, 8, 10, 20]
# using takewhile() to print values till condition is false.
print ("The list values till 1st false value are : ", end ="")
print (list(itertools.takewhile(lambda x : x % 2 == 0, li )))
Output:
The list values till 1st false value are : [2, 4, 6]
tee(iterator, count):- This iterator splits the container into a number of iterators mentioned in the argument.
Example:
# Python code to demonstrate the working of
# tee()
import itertools
# initializing list
li = [2, 4, 6, 7, 8, 10, 20]
# storing list in iterator
iti = iter(li)
# using tee() to make a list of iterators
# makes list of 3 iterators having same values.
it = itertools.tee(iti, 3)
# printing the values of iterators
print ("The iterators are : ")
for i in range (0, 3):
print (list(it[i]))
Output:
The iterators are :
[2, 4, 6, 7, 8, 10, 20]
[2, 4, 6, 7, 8, 10, 20]
[2, 4, 6, 7, 8, 10, 20]